The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
The SPE Library is just one of the great benefits of being an SPE member! Are you taking advantage of all of your SPE Benefits?
Background: In Spring of 2020, Instaversal was contracted to test our newly developed conformal cooling technology, CoolTool™, against existing production benchmarks for a plastic injection molded Pipe Bracket Adapter. The Product Innovator was going through a period of elevated demand where the current cycle time of the existing injection mold tool prohibited them from meeting their demand. When cooling cycles were sped up this led to higher scrap rates due to sink marks. This left the Product Innovator with two options: delay delivery of the product to their top customer with the risk of losing the sale and potentially losing the customer or to invest in additional injection mold tools to double production capacity. To meet the customer’s demand, 100,000 parts needed to be produced in a 60-day time period. This request created conflict with the contract manufacturer. They were being asked to absorb the cost of additional molds to meet the timing or run full 24-hour (Monday-Friday) shifts over the 60-day period which would create losses in revenue by eliminating other clients’ scheduled jobs.
Anatoliy Batmanov, Vanessa Frettloeh, Ruben Schlutter, Frank Mumme, Paul Ditjo, Ivan K. Kibet, Juergen Wieser, June 2022
Effect of the thermal barrier coating (TBC), deposited on the mold for plastic injection molding was investigated. The mold cavities were coated by yttrium stabilized (YSZ) and phosphorous doped (PDZ) zirconium dioxide as multilayer film using chemical vapor deposition (CVD) method. It was found that films deposited at higher temperatures have better thermo-insulating properties than films deposited at lower temperatures. Growth rate and film porosity increase as deposition temperature increases. It was observed that the TBC slightly affects the flow length of the plastic melt but improves the filling ability of poorly vented molded part areas.
Aniruddha Palsule, Rachel Jacobs, Martin Gibler, Robert J. Klein, June 2022
ASTM F1980 provides a methodology for accelerated aging of sterile barrier systems for medical devices, and is also widely used as the definitive guide for accelerated aging of medical devices and pharmaceutical packaging. ASTM F1980-16, as well as previous versions going back to 2007, emphasize that when increasing temperature to accelerate aging, it is preferable to decrease relative humidity so as to maintain an approximately constant moisture content. However, there is a revision under consideration by the ASTM F02.50 committee that would dramatically change this guidance to indicate a preference (although allowing for other options) to keep relative humidity approximately constant. This change is based on somewhat limited test data and literature review published recently by Thor et al. In this paper, we perform a study looking at eight resins (PP, COC, ABS, PC/PET, Copolyester, PBT, PA66gf, PUR) that have been aged at 60C and three different RH levels to evaluate the impact on aging. Our findings to date indicate that: (i) yes, it is likely that RH should be held constant when increasing temperature in order to keep moisture constant in the resins at a similar level; and (ii) for the medical-grade resins evaluated here, RH level does not significantly impact the physical aging mechanism. We also recommend that further accelerated aging studies are performed to more thoroughly evaluate the impact of moisture content on Q10 factors, corrosion rates, and other endpoints before this dramatic change is made to the ASTM F1980 standard.
Arit Das, Kathleen J. Chan, Michael J. Bortner, David A. Dillard, Davide S.A. De Focatiis, June 2022
The viscoelastic properties of carbon fiber reinforced thermoset composites are of utmost importance during processing such materials using composite forming. The quality of the manufactured parts is largely dependent on intelligent process parameter selection based on the viscoelastic and flow properties of the polymer resin. Viscoelastic properties such as the complex viscosity (η*), storage modulus (G’), loss modulus (G’’), and loss tangent (tanδ) are used to determine the critical transition events (such as gelation) during curing. An understanding of the changes in viscoelastic properties as a function of processing temperature and degree of cure provides insight to establish a suitable processing range for compression forming of prepreg systems. However, tracking viscoelastic properties as a function of cure during the forming process is a challenging task. In this current work, we have investigated the effect of sample size and adhesive type on the rheological properties of a commercially available carbon fiber prepreg material. Specifically, determining the linear viscoelastic region (LVE) as a function of sample configuration and different adhesive chemistries were explored. The results suggest that the square-shaped sample geometries coupled with cyanoacrylate based adhesive are optimum for conducting rheological characterization on the carbon fiber prepreg system.
The post-consumer single-use polyethylene-based plastic bags supplied by the supermarket grocery stores, are converted into new materials with improved mechanical properties using a thermo-mechanical recycling process. The low-density polyethylene (LDPE) sourced from waste plastic bags, is injected into a high shear internal mixer and compounded with the additives such as acrylonitrilebutadiene copolymer or nitrile rubber (up to 10 wt%) and also treated with an organic peroxide curing agent. The resultant materials exhibit high ductility and elasticity, with a maximum tensile strength of 20.3 MPa, stiffness of 1262 MPa, elongation of approximately 500%, and impact strength of 62 kJ/m2 depending on materials compositions. These mechanical properties are profoundly higher than those of neat recycled LDPE. It is observed that the post-consumer plastics contain a significantly high amount of calcium mineral of approximately 30 wt% (13 vol %)[1], which plays a key role in improving mechanical properties during high shear blending with additives such as nitrile rubber. The melt-rheological characteristics such as complex viscosity and storage modulus of the materials are analyzed to evaluate the thermal recyclability and thermoplastic nature of the materials.
Presently, polymers such as high density polyethylene(HDPE) are utilized for an extensive array of applications because of their low weight, economical production, and exceptional physical and chemical properties. Thermal analysis and rheological measurements are the ideal techniques for characterizing the material properties of polymers. This paper employs thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), and capillary rheometry to collate the contrasting nature of two HDPE resins. These resins will be referred to as HDPE A and HDPE C and are similar to two resins (Sample A and Sample C) included in a previous publication [1] that focused on blow molding parison sag and swell. TGA was used to investigate the thermal stability of these polymeric materials, as they were ultimately decomposed inside a furnace. DSC was conducted to examine the thermal transition behaviors of the polymers. Capillary rheometry was run to construct shear viscosity and extrudate swell versus shear rate data through single and twin bore configurations under varying temperatures. These measurements were conducted under testing conditions that are representative of industrial processes, such as extrusion blow molding. HDPE C was found to exhibit greater extrudate swell than HDPE A, as measured by capillary rheology measurements, and these data correspond to the earlier published results that Sample C exhibited greater parison diameter, thickness, and weight swell than Sample A as measured with a lab scale extruder.
Byeonglyul Choi, Byoung-Ho Choi, Un Bong Baek, June 2022
In high pressure hydrogen environment, elastomeric seals undergo degradation of mechanical properties and wear problems. Especially, wear of elastomeric seals causes failure of sealing system. Therefore, developing the material with good mechanical properties and wear resistance is important. In this study, five ethylenepropylene-diene-monomer (EPDM) with different content of plasticizer were prepared to investigate the effect of plasticizer on their tribological properties after the specimens were exposed to high pressure hydrogen.
Jung-Wook Wee, Alexander Chudnovsky, Byoung-Ho Choi, June 2022
In this study, the stress corrosion crack (SCC) growth model for the cracked round bar (CRB) specimen was developed. The axisymmetric crack layer (CL) theory for simulating the slow crack growth (SCG) behavior of CRB specimen was modified to consider the chemical degradation due to diffused aggressive environment. The diffusion of oxidative fluid into the process zone (PZ) in radial direction is considered. Also, the chemical degradation kinetics of PZ materials due to the oxidation were modeled. The proposed model was shown that the discontinuous SCG behavior and the deteriorative effect from the chemicals were successfully simulated.
Cailean Q. Pritchard, Jacob J. Fallon, Jeffrey Shelton, Michael J. Bortner, Cody Weyhrich, Katherine Heifferon, Boer Liu, Timothy E. Long, E. Johan Foster, June 2022
Smart materials that can adapt their mechanical response in the presence of an external stimuli are popular for their applications in 4D printing. Such printing methods exploit a smart material’s capability to interact with these stimuli to impart controlled material deformation tailored to specific applications. A modified percolation model was formulated to predict the dynamic transition exhibited in polymer composites containing cellulose nano-crystals (CNCs) which undergo mechanical softening in the presence of water. Coupling the effects water diffusion to the degree of CNC connectivity provided a method to capture the dynamic softening of CNC-based, water responsive smart materials as a function of filler loading. This modeling approach can be implemented to develop humidity sensing actuators and water-sensitive shape memory devices.
Caroline R. Multari, Raymond A. Pearson, June 2022
A particle additive is reported that simultaneously improves ductility and biodegradation behavior of poly(lactic acid) (PLA). Our approach explores the use of encapsulation technology to create degradation-promoting additives while limiting any breakdown of the matrix during melt extrusion and service life. In addition to promoting biodegradation such encapsulated particles are designed to enhance toughness of the matrix. Such dual use particles have the potential to broaden the uses of PLA. In this work, particle properties are examined and the accompanying tensile behavior and compostability of the composite investigated. Particles were dispersed within the PLA matrix by extrusion to 3D printer filament. Elongation at break was improved over neat PLA with limited loss of yield strength. Degradation rate in compost is accelerated and decoupled from environmental conditions by embedding a degradant material into the PLA matrix itself, aided by encapsulation technology that isolates and protects the degradant. The additive has been found to improve mechanical properties while accelerating the biodegradation of parts produced by extrusion-based methods.
Curtis Covelli, Dr. David Grewell, Shichen Yuan, Klaus Schmidt-Rohr, June 2022
This study investigates the factors affecting the welding of pine, maple, and bamboo pulp-board. This research used a Branson Mini II vibration welder traditionally used for welding plastics. The effects of weld pressure, amplitude, and weld time were varied to determine their effects on lap-shear weld strength. Strength testing was performed with a universal testing machine. The morphology of the weld zone was also analyzed to gain insight into the welding mechanics. The highest strength of pine samples was 8.4 MPa, while maple was approximately 35% stronger and had a smaller standard error. It was observed that bamboo pulp board weld strength was primarily dependent on weld pressure. Also, pulp-board seemed to weld in a similar fashion to wood.
Hybrid materials nowadays are achieving increasing market dominance in the technical segment due to their outstanding mechanical properties. One such hybrid material that is increasingly coming into focus, especially in mobility branch, are fiber-reinforced plastics. They offer the advantage of low weight and high strength. As a rule, generally glass or carbon fibers are embedded in the matrix material. Over the last few years, the demand for fiber-reinforced plastics has increased continuously. Considering the recent changes in the automotive industry, it is expected that this trend will not change in the near future, especially with regard to the weight reduction of means of vehicles.
Nishant Singh, Celina Alvarado, Carlos A. Diaz, Baxter Lansing, Christopher L. Lewis, June 2022
In this work we examine the influence of talc and a polymeric carbodiimide on the hydrolytic degradation resistance of a commercially available Poly(L-Lactic acid) PLLA. Here, polymer blends containing 0-4wt% talc, a crystal nucleating agent and 0-1 wt% of a polymeric carbodiimide (CDI), an anti-hydrolysis agent, were melt blended and compression molded into plaques. Samples were then submerged in a phosphate buffer solution (PBS) at 50°C for up to 60 days. Results indicate that the presence of talc as the sole ingredient in the formulation increases the crystallization rate and this translates to an increase in the degree of crystallinity of compression molded plaques and a modest improvement in hydrolytic degradation resistance as compared to unfilled PLLA. The presence of CDI retards PLLA crystallization. In spite of this, compounds containing CDI exhibited much greater hydrolytic degradation resistance than PLA with the effect being more pronounced with increasing CDI concentration. Under DSC conditions, the addition of 1wt% talc to CDI containing compounds improved the non-isothermal crystallization rate at 5°C/min but this effect diminished as cooling rate increased and this explains the low crystallinity of compression molded samples. However, compounds containing both talc and CDI showed an improved hydrolysis resistance as compared to compounds containing only CDI implying that talc's role in reducing the rate of hydrolysis is caused by the hydrophobic characteristic of the material. It is envisioned that this work will help pave the way for the usage of PLA in durable applications where long-term resistance to humidity is anticipated.
Swapnil Bhattacharya, Harshal J. Kansara, Celina E. Alvarado, Carlos A. Diaz, Jeffrey Lodge, Christopher L. Lewis, June 2022
Mulch films modify soil conditions thus improving crop output, hence are widely used across the world. Traditional PE (polyethylene) films do not degrade and must be disposed of afterwards. Biodegradable mulch films (BMFs) provide a much better alternative and are meant to be tilled with the soil after harvest. But most BMFs degrade slowly and accumulate in soil, harming the soil productivity. In this investigation we evaluate the effect of gliding arc plasma treatment on the behavior of a commercially available biodegradable mulch film based on polybutylene adipate co-terephthalate (PBAT) and polylactic acid (PLA). Following plasma treatment an initial increase in the hydrophilicity of the films is observed and this is attributed to an increase in oxygen containing species on the surface. Moreover, hydrophobic recovery is slow as indicated by contact angle measurements taken over a 30-day time. Thermal analysis results indicate no significant difference indicating that treatment is confined primarily to the surface. A treated film showed enhanced disintegration as compared to an untreated film following 65 days of composting in an aerated static pile compost. These results indicate that plasma treatment may aid the biodegradation of plastic mulch films and therefore eliminate their accumulation in soil.
Faisal J. Alzahrani, Peng Gao, Alaauldeen Duhduh, John P. Coulter, June 2022
This research investigated the effect of the addition of Orotic Acid (OA) on the crystallization kinetics of Polylactic Acid (PLA) in quiescent and non-quiescent conditions. A differential scanning calorimetry (DSC) study was used to investigate and understand the effect of the addition of orotic acid on 2500 HP PLA under quiescent conditions. DSC technique was utilized to capture the crystallinity, melting point, and other thermal parameters of PLA-OA blends. Conventional injection molding (CIM) was used to investigate the influence of adding OA into PLA under non-quiescent conditions. Two concentrations of orotic acid, 0.3 wt% and 0.7wt% were mixed with neat PLA and then investigated. It was observed that the 0.3 wt.% orotic acid provided significant improvement in crystallization kinetics by increasing the crystallinity and reducing the incubation time. Both blends under quiescent conditions showed almost the same crystallinity in which the maximum crystallinity that was observed was around 63% in the blend of the PLA/0.7OA at 85°C. For 2500HP PLA, Orotic acid (OA) showed to be an effective nucleating agent. A small amount (0.3 wt%) was sufficient to achieve 61% of crystallinity in injection molding at 80°C mold temperature.
Felix Vorjohann, Lucas Schulz, Mirco Janßen, Reinhard Schiffers, June 2022
CFD-Simulations are a common tool to design and optimize mixing elements. The manual evaluation and experience-based derivation of an optimized geometry is still an iterative process which is time consuming. In this paper an automated algorithm is developed and tested for a mainly distributive Block-Head-Mixer. To automatically evaluate the flow field of each geometry variant, quality criteria are introduced which enable the assessment of the mixing capability. The investigation showed that the quality criteria are suitable to evaluate the flow field and an optimized candidate compared to a starting geometry could be found automatically.
Luke Weger, Luis Velazquez, Corina Barbalata, Debaroty Roy, Genevieve Palardy, June 2022
Robotic 3D printing systems utilizing photopolymers can enable free-standing structures, large-scale printing, extensive mobility, and increased part complexity. However, to better estimate robotic printing parameters and eliminate expensive trial-and-error approaches, a simulation framework for curing behavior is needed. In this work, an autocatalytic curing model, considering printing speed, UV light intensity, spotlight diameter, and filament thickness, was used to create a MATLAB simulation to study the effect of different printing parameters. The printed filament was discretized into a set number of elements over its length and thickness. UV light exposure time above each element was derived based on spot diameter and printing speed. This simulation framework, combined with experimental data (real-time ATR-FTIR), can better inform decisions regarding printing parameters selection. Overall, it was estimated that a speed ≤ 3 mm/s with a filament thickness ≤ 2 mm would produce acceptable ranges of degrees of cure at different UV light intensities and spot diameters. Finally, control of printing parameters (robotic arm movement and UV light intensity) to obtain a specific degree of cure (DoC) ensuring structural rigidity is demonstrated for a two-degree-of-freedom manipulator, showing both the desired endeffector position and the desired DoC are achieved in four seconds.
Microporous ultra-high molecular weight polyethylene (UHMWPE) parts were produced by microcellular injection molding (MIM) technology, which enabled higher production efficiency and lower part cost compared to the traditional powder sintering method. The microstructure could be tuned by adjusting the shot size to produce either sandwiched solid-skin – porous-core – solid-skin parts or open porous parts. The pore morphology, average pore size, pore size distribution, and pore density were characterized, and the water contact angle (WCA) and degree of oil-water separation were determined. The part weight reduction of open-porous UHMWPE and sandwiched UHMWPE parts were 16.5 wt% and 11.8 wt%, respectively. The WCA results showed that the porous surface transformed molded UHMWPE samples from being hydrophilic (34.5°) to hydrophobic (124.6°). Furthermore, the open-porous structure exhibited good oil water separation capacity. Tensile tests were carried out to study the effect of morphology on the mechanical performances of the molded UHMWPE parts. The characterization shows that a possible application for the sandwiched UHMWPE parts could be as a bone replacement material because of its high mechanical performance, and an application for the open-porous UHMWPE is as a functional filter material due to the fine pore size and high pore density.
James Sternberg, Srikanth Pilla, David G. Brandner, Reagan J. Dreiling, Arik Ringsby, Jacob S. Kruger, Gregg T. Beckham, June 2022
The movement to transfer from petroleum-based products and materials to renewables does not necessarily have to bypass the use of oil. A new type of “black-gold” is readily abundant from the earth’s most abundant source of aromatic carbon: lignin. While fractionation of petroleum yields fuels and chemicals for a diverse set of industries, lignin fractionation using targeted catalysts has demonstrated the ability to generate monomers and oligomers rich in functional groups for polymer synthesis. This study explores the use of lignin-oil, generated from reductive catalytic fractionation of popular wood, to a hydroxyl-rich mixture of aromatics that is used to synthesize a thermoplastic non-isocyanate polyurethane. The lignin-oil is first converted to a cyclocarbonated derivative using a benign synthetic sequence and further polymerized with a diamine to yield the non-isocyanate TPU. While more work is underway to optimize the reaction conditions and meet typical mechanical properties of commercial materials, initial analysis shows thermoplastic behavior and flexible properties consistent with traditional thermoplastic polyurethanes.
In polymer extrusion, the die temperature is normally set to the recommended temperature in order to reach a homogeneous melt. Nevertheless, the measurement of the melt and surface temperature of the product leaving the die is not state of the art due to the difficulty of an inline - measurement. As a consequence, the product temperature leaving the die is assumed as the set die temperature. Therefore, this article aims to engineer an inline-measurement system of the surface temperature of square hollow profiles immediately after leaving the die. First, two objective quality criteria to define the thermal melt homogeneity, named weighted melt temperature and radial temperature, are introduced. After that, experimental investigations are carried out for two different types of polyolefin polymers with the variation of several process parameters such as the screw speed and the die temperature. In order not to distort the product, the developed construction is based on a contactless measurement system using infrared pyrometers to measure the average surface temperature on each side of the profile. After all, rules of behavior are derived from the process and correlations between the investigated process parameters and the melt quality as well as the surface temperature are identified.
84 countries and 60k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
.jpg)
.jpg)
.jpg)
.jpg)
